Search
Products
------------------------------------- --------------------------------------

# ERCKFRM-QS8313F - Finned Heavy Duty External Voltage Regulator By-pass Kit, Chrysler Dodge Jeep Alternators, Heavy Duty Finned Regulator


Price: $79.95
Part #: ERCKFRM-QS8313F

Adjustable Heavy Duty Voltage Regulator By-Pass kit with EXCLUSIVE Super Cooling Finned Regulator for Greater Durability on Chrysler Dodge, Chrysler, Jeep applications. Heavy Duty option for Applications on early Chrysler, Dodge, Plymouth Vehicles with DUAL FIELD  alternators.

Exclusive Stainless Steel Plug Retaining Clip that keeps the plug from falling out.

Part code (number) :  ERCKFRM-QS8313F

Since 1987 for Dodge and Chrysler vehicles and since 1991 for Jeep Family vehicles have alternators that are controlled by the Alternator Voltage Regulator Control Module inside the vehicle computer. 
CAUTION: vehicles after 2005 may also require a modified driver as well. Email your vehicles year, make, model, engine info for your vehicle and we will tell you

Engine Control Unit (Computer).

The computer is often called the ECC, ECM, EEC, or PCM. Often the alternator voltage regulator, or field control module, in the computer will fail, leaving you with a dead charging system situation where your alternator doesn't work, yet your engine runs just fine. To get your alternator working your entire computer would need to be replaced.

In a bind?, to get your alternator working you can bypass the internal Alternator Voltage Regulator Control inside the computer by using our External Voltage Regulator By-Pass kit.

Kit Contents:

Heavy Duty Adjustable Voltage Regulator with Super Cooling Finns

Includers Gold colored FRM module ( not shown)

Wiring harness to Alternator in split tubing with molded Plug with Retaining Clip to Regulator

14 Gauge Grounding wire from Regulator to Alternator

#10 Insulated Ring terminals 14/16

1/4"  Insulated Ring terminal 14/16

Insulated Butt Splice Connectors

Flat Blade Connectors

Hex Head Regulator Mounting & ground screws

Zip Ties

Instruction Sheet (English) other language downloaded in PDF format via email

Free email & phone help with purchase


How to test your alternator on the vehicle:

To check to see if your alternator is working, unplug or remove the two field wires from the back of the alternator. Then ground one of the field terminals on the alternator and jumper the other field terminal to the positive battery post on the back of the alternator. It does not matter which terminal is grounded and which one get positive power. When you connect the ground and positive wires to the field terminals you will get a small spark, this is normal. This is by-passing the voltage control and will cause your alternator to run full blast, if it is working. Put a multi-meter on your battery and run your engine on high idle, do not allow your alternator to charge the battery much over 16 volts. If you find that your alternator is charging when you do this procedure, but does not charge when you connect it back to the computer, this kit will get your alternator working and charging at the proper voltage. The voltage regulator is preset at 14.5 volts. If you want to adjust the voltage regulator you use the screw on the back, but be sure the metal case of the voltage regulator is grounded while you adjust it.


Ref: QSERCK , ERCK

Related Products

Page 1 of 2 Page 12movenext
# ERCKFRM - Heavy Duty Chrysler, Dodge, Jeep External By-Pass Voltage Regulator Kit with Field Replacement Module
Price: $64.95
# ERCKFRM  - Heavy Duty Chrysler, Dodge, Jeep External By-Pass Voltage Regulator Kit with Field Replacement Module
Chrysler, Dodge, Jeep External Voltage Regulator Kit with Field Replacement Module. Gets your alternator working when the computers voltage control fails, FRM may prevent check engine light.
# ERCK - External Voltage Regulator Kit, Chrysler Dodge Jeep Alternators, Heavy Duty Regulator
Price: $54.95
# ERCK - External Voltage Regulator Kit, Chrysler Dodge Jeep Alternators, Heavy Duty Regulator
Chrysler, Dodge, Jeep External Voltage Regulator Conversion Kit To get your alternator working when the alternator voltage control of your vehicles computer fails.
# FRM - Field Replacement Module for Dodge, Chrysler, and Jeep vehicles - Use With ERCK kit to put out the Check Engine Light
Price: $19.95
# FRM - Field Replacement Module for Dodge, Chrysler, and Jeep vehicles - Use With ERCK kit to put out the Check Engine Light
This module simulates the alternator to trick your PCM's computer into thinking the alternator is still attached, getting rid of the fault code & no charge light.
# ERCKE - Dodge-Chrysler-Jeep External Voltage Regulator Kit, Chrysler Dodge Jeep, Standard Duty non-ajustable Voltage Regulator, Economy version
Price: $44.95
# ERCKE - Dodge-Chrysler-Jeep External Voltage Regulator Kit, Chrysler Dodge Jeep, Standard Duty non-ajustable Voltage Regulator, Economy version
Economy External Regulator kit. Includes a good quality # C8312 standard duty voltage regulator and wiring harness. Note: economy Regulator has a field load capacity of 5 amps. The upgrade heavy duty adjustable regulator has a 10 amp field duty rating
# QS8313, aka C8313 - Adjustable Heavy Duty External Chrysler type, Voltage Regulator with Adjustable Voltage
Price: $34.95
# QS8313, aka C8313 - Adjustable Heavy Duty External Chrysler type, Voltage Regulator with Adjustable Voltage
Heavy Duty Voltage Regulator, HEAVY DUTY , 12 Volt, A-Circuit, Negative Ground., Red Plug Connector, 14.3 Voltage set point, Adjustable Voltage
Page 1 of 2 Page 12movenext
Shopping Cart
Shopping Cart
Your cart is empty.
LOOK HERE

Your product will be added to this shopping cart when you click the buy button.

payment options available
Products
------------------------------------