------------------------------------- --------------------------------------

# ERCK-E-FRM - Economy Regulator Kit with FRM. For Dodge Chrysler Jeep Vehicles

Price: $54.95

Exclusive Stainless Steel Plug Retaining Clip 
When the plug falls out, someone gets stranded, no fun.

External Voltage Regulator kit for 1988 & up Chrysler Corporation Vehicles

Product code (part number) : ERCK-E-FRM

Since 1987 for Dodge and Chrysler vehicles and since 1991 for Jeep Family vehicles have alternators that are controlled by the Alternator Voltage Regulator Control Module inside the vehicle computer. 
CAUTION: vehicles after 2005 may also require a modified driver as well. Email your vehicles year, make, model, engine info and we will tell you if a modified driver is needed

Engine Control Unit (Computer).

The computer is often called the ECC, ECM, EEC, or PCM. Often the alternator voltage regulator, or field control module, in the computer will fail, leaving you with a dead charging system situation where your alternator doesn't work, yet your engine runs just fine. To get your alternator working your entire computer would need to be replaced.

In a bind?, to get your alternator working you can bypass the internal Alternator Voltage Regulator Control inside the computer by using our External Voltage Regulator Conversion kit.

Note: USE KIT #ERCKFRM for a better upgraded adjustable voltage regulator.

Kit Contents:

Heavy Duty non-Adjustable ( 14.3 setpoint) Voltage Regulator

Field Replacement Module

Wiring harness to Alternator in split tubing with molded Plug to Regulator

14 Gauge Grounding wire from Regulator to Alternator

#10 Insulated Ring terminals 14/16

1/4"  Insulated Ring terminal 14/16

Insulated Butt Splice Connectors

Flat Blade Connectors

Hex Head Regulator Mounting Screws

Zip Ties

Instruction Sheet (English) with phone tech help

How to test your alternator on the vehicle:

To check to see if your alternator is working, unplug or remove the two field wires from the back of the alternator. Then ground one of the field terminals on the alternator and jumper the other field terminal to the positive battery post on the back of the alternator. It does not matter which terminal is grounded and which one get positive power. When you connect the ground and positive wires to the field terminals you will get a small spark, this is normal. This is by-passing the voltage control and will cause your alternator to run full blast, if it is working. Put a multi-meter on your battery and run your engine on high idle, do not allow your alternator to charge the battery much over 16 volts. If you find that your alternator is charging when you do this procedure, but does not charge when you connect it back to the computer, this kit will get your alternator working and charging at the proper voltage. The voltage regulator is preset at 14.3 volts. If you want to adjust the voltage regulator use the erckfrm kit.


Related Products

Page 2 of 2 Page moveprev12
# W210 - Chrysler External Regulator Wiring Harness, Wiring harness for use with the C8313 voltage regulator. Used in our ERCK External Regulator
Price: $34.95
# W210 - Chrysler External Regulator Wiring Harness, Wiring harness for use with the C8313 voltage regulator. Used in our ERCK External Regulator
Wiring harness for use with the C8313 & C8312 voltage regulators. Used in our ERCK series External Regulator Conversion Kits.
Page 2 of 2 Page moveprev12
Shopping Cart
Shopping Cart
Your cart is empty.

Your product will be added to this shopping cart when you click the buy button.

payment options available